 |
|
| Back to top |
|
DIFFERENTIAL LOCK
When wheel slippage occurs, the rear differential lock pedal
can be engaged easily. It immediately activates both rear
wheels. 4WD models of M6800/8200/9000 also include a similarly
easy-to-reach front differential lock pedal, which can be
operated independently from the rear differential lock. The
result is a reduction in slippage. |
|
|
E-TVCS ENGINE
The M-Series from Kubota features the E-TVCS engine, a sophisticated
indirect injection, liquid-cooled diesel engine which meets EPA
regulations concerning emissions. Our multi-valve system on M6800/8200/9000
provides for more efficient air intake, which leads to greater power,
higher torque rise, faster combustion, cleaner emissions, and lower
noise. |
 |
 |
|
| Back to top |
|
HIGH TORQUE RISE
The governor and fuel injection pumps are integrated into
a single, compact unit to produce an astounding 28% torque
rise (26% on M4900/5700). Response to sudden load fluctuations
is quick, reducing engine rpm drop. This means these tractors
will perform smoothly under virtually any load condition with
less need for downshifting and greater fuel efficiency. |
|
|
|
BEVEL GEAR 4WD
Thanks to Kubota's bevel gear 4WD system, the turning radius is
comparable to that of a 2WD. As well as allowing exceptional mobility
in tight areas, the bevel gear system allows smooth power transfer
to the wheels at all angles. All gears are hermetically sealed in
oil to improve durability. |
 |
 |
|
| Back to top |
|
HYDROSTATIC POWER STEERING
Kubota's hydrostatic power steering, while assuming the burden
of heavy work, provides smooth, responsive steering. Power
assist is enough even when the vehicle is stationary. |
|
|
HANGING PEDALS AND EASY-TO-OPERATE
CONTROL LEVERS
Augmenting the spaciousness of the deck are the hanging pedals.
The hanging pedals provide more legroom, as well as increase comfort.
All control levers have been strategically positioned for maximum
operating room, efficiency, and access. |
|
|
|
|
|
CLUTCH
Kubota has upgraded the heavy-duty main clutch with a new,
well-tested material of superb abrasion resistance to extend
clutch life. The reliability of the clutch for heavy loader
work has been further improved. The clutch diameter is 10.8
inches (275mm) on M4900/5700/6800, and 11.8 inches (300mm)
on M8200/9000.
|
|
|
FULL-FLOATING ISO-MOUNTED SEMI-FLAT/FULL-FLAT
CAB DECK
The deck was ergonomically designed to maximize operator comfort.
The deck is spacious enough to allow comfort and freedom of movement.
ISO (Isolated)-mounting with rubber mat also helps to decrease operator
fatigue by reducing noise and vibration, even after long hours on
the job. |
 |
|
| Back to top |
|
ENCLOSED MUFFLER
For added operator visibility and even further noise reduction,
the muffler is contained within the engine compartment. The
only protrusion is an exhaust pipe, which can be detached
easily without opening the hood when the ROPS is folded down
temporarily. For a lower profile, an optional under muffler
or a down exhaust pipe (on ROPS models) is available. |
|
|
ONE-PIECE FULL-OPEN HOOD
Maintenance is easily performed, thanks to the new high-access,
one-touch opening hood; servicing points such as the battery, air
cleaner, radiator screen, and fan belt are within easy reach. The
hood, fenders, and fuel tank are made of formed steel for longevity,
quick repair, and a sturdy, dignified look. |
 |
 |
|
|
|
|
DUAL-ELEMENT AIR CLEANER
The highly efficient air-cleaning system consists of two
dry-type elements: a primary and a secondary that combine
to ensure engine longevity. The system allows risk-free primary
filter replacement even in dusty conditions. |
|
|
FOLDABLE ROPS
A foldable Roll-Over Protective Structure with retractable seatbelt
is standard. It may be temporarily folded down without tools, so
that the tractor may pass under areas with height constraints. (There
is no operator protection provided by the ROPS in the folded position.
For operator safety, the ROPS should be placed in the upright and
locked position and the seat belt fastened for all other operations.) |
 |
 |
|
| Back to top |
|
LARGE CAPACITY HYDRAULIC PUMPS
The Kubota M9000 (M8200 optional) boasts an exceptionally
large hydraulic pump capacity of 17 gpm (64.3 l/min). The
M4900/5700/6800 and M8200 are equally as impressive at 11
gpm (41.6 l/min). As a result, the front loader cycle times
are short, increasing productivity and facilitating operation. |
|
|
AUXILIARY REMOTE HYDRAULIC VALVES
The M-Series have a double-acting remote hydraulic valve with detents
and self-canceling feature as standard equipment. Additional self-canceling
or float type valves are optional. Thanks to the optional flow control
valve (on specific models), the 3-point hitch and a remote valve
may be operated simultaneously. Simultaneous operation can be made
between two remote valves, as well. (Valves are optional on the
M4900SUD.) |
 |
 |
|
|
|
|
LIVE-INDEPENDENT, HYDRAULIC PTO
The M-Series offers smooth operation with a live, independent,
540-rpm PTO with a hydraulically actuated, wet-type PTO clutch.
Self-modulating engagement with a light touch means implements
engage smoothly. The independent-type PTO clutch can be engaged
or disengaged without depressing the clutch pedal, regardless
of whether the tractor is stationary or moving. The clutch
lever is located on the right-hand side to provide easy visibility
to implements during operation. |
|
|
3-POINT HITCH
The Category I & II (M4900/5700/6800) and Category II (M8200/9000)
3-point hitch provides fast attachment of implements. The lift rod
and stabilizers allow easy implement hook-up. The telescopic lower
link ends further facilitate attachment (optional on the M4900SUD).
Lift capacity is as much as 3310 lbs. (1500kg) on M4900/5700/6800
and 4630 lbs. (2100kg) on M8200/9000 at 24" behind the lift
point. |
 |
 |
|
| Back to top |
|
MAXIMUM COMFORT CAB
The M-Series Ultra Cab II is one of the most comfortable
on the market today. Thanks to a dual-level air conditioning
system, it’s possible to cool your upper body while keeping
your feet warm. A deluxe seat provides armrests, reclining
seat back, and suspension system. The full-flat deck has been
engineered to provide plenty of leg room, while reducing vibration
and driver fatigue. |
|
|
EASY OPERATION
M-Series tractors feature cabs that are ergonomically designed
for maximum productivity. All operational levers, including the
main shift lever, are conveniently located to the side of the seat,
within easy reach. A tilt steering wheel has been designed to better
suit the unique posture of the driver. The fuel tank has been enlarged,
minimizing the amount of downtime needed for refueling. |
 |
 |
|
|
|
|
EXCELLENT VISIBILITY
Thanks to a large overall glass area and frameless doors,
we’re able to offer excellent visibility. Side windows
may be opened, as can the hatch-back-type rear window. The
bottom-hinge front wiper also helps improve visibility. |
|
|
STANDARD EQUIPMENT FOR
CAB
The following equipment is available as standard.
• Front windshield wiper and washer
• Front and rear working lights
• Interior light
• Cigarette lighter
• External mirrors
• Sun visor
• Ashtray
• Safety flashers (two)
• Tail lights (two)
• Cup holder |
|
| |
|
| Back to top |
|
OPTIONAL EQUIPMENT
FOR CAB
• Radio cassette player
• Rear wiper and washer |
|
|
