 |
|
| Back to top |
|
DIFFERENTIAL LOCK
When wheel slippage occurs, the rear differential lock pedal
can be engaged easily. It immediately activates both rear
wheels. |
|
|
E-TVCS ENGINE
The M-Series from Kubota features the E-TVCS engine, a sophisticated
indirect injection, liquid-cooled diesel engine that meets EPA regulations
concerning emissions. Our multi-valve system on the M8200 provides
for more efficient air intake, which leads to greater power, higher
torque rise, faster combustion, cleaner emissions, and lower noise. |
 |
|
HIGH TORQUE RISE
The governor and fuel injection pumps are integrated into a single,
compact unit to produce an astounding 26% torque rise on the M5700,
28% on the M8200. Response to sudden load fluctuations is quick,
reducing engine rpm drop. This means these tractors will perform
smoothly under virtually any load condition with less need for downshifting
and greater fuel efficiency. |
|
|
BEVEL GEAR 4WD
Thanks to Kubota’s bevel gear 4WD system, the turning radius
is comparable to that of a 2WD. As well as allowing exceptional
mobility in tight areas, the bevel gear system allows smooth power
transfer to the wheels at all angles. All gears are hermetically
sealed in oil to improve durability. |
 |
|
| Back to top |
|
HYDROSTATIC POWER
STEERING
Kubota’s hydrostatic power steering, while assuming
the burden of heavy work, provides smooth, responsive steering.
Power assist is enough even when the vehicle is stationary. |
|
|
CLUTCH
Kubota has upgraded the main clutch with a new, well-tested material
of superb abrasion resistance to extend clutch life. The reliability
of the clutch for heavy loader work has been further improved. The
clutch diameter is 10.8 inches (275mm). |
|
|
HANGING PEDALS AND
EASY-TO-OPERATE CONTROL LEVERS
Augmenting the spaciousness of the deck are the hanging pedals.
The hanging pedals provide more legroom, as well as increase
comfort. All control levers have been strategically positioned
for maximum operating room, efficiency, and access. |
|
|
|
ONE-PIECE FULL-OPEN HOOD
Maintenance is easily performed, thanks to the new high-access,
one-touch opening hood; servicing points such as the battery, air
cleaner, radiator screen, and fan belt are within easy reach. The
hood, fenders, and fuel tank are made of formed steel for longevity,
quick repair, and a sturdy, dignified look. |
|
 |
|
| Back to top |
|
DUAL-ELEMENT AIR CLEANER
The highly efficient air-cleaning system consists of two
dry-type elements: a primary and a secondary that combine
to ensure engine longevity. The system allows risk-free primary
filter replacement even in dusty conditions. |
|
|
ROPS
A mid-mount foldable Roll-Over Protective Structure is standard.
It may be temporarily folded down without tools, so that the tractor
may pass under areas with height constraints. (There is no operator
protection provided by the ROPS in the folded position. For operator
safety, the ROPS should be placed in the upright and locked position
and the seat belt fastened for all other operations.) |
|
 |
|
|
LARGE CAPACITY HYDRAULIC PUMPS
These M-Series boast an exceptionally large hydraulic pump
capacity of 11gpm (41.61/min) resulting in increasing productivity. |
|
|
AUXILIARY REMOTE HYDRAULIC
VALVES
The M-Series have one double-acting remote hydraulic valve with
detents and self-canceling feature as standard equipment. A second
valve with self-canceling detents is optional. |
|
 |
|
| Back to top |
|
LIVE-INDEPENDENT HYDRAULIC PTO
These M-Series offer smooth operation with a live, independent,
540-rpm PTO with a hydraulically actuated, wet-type PTO clutch.
Self-modulating engagement with a light touch means implements
engage smoothly. The independent-type PTO clutch can be engaged
or disengaged without depressing the clutch pedal, regardless
of whether the tractor is stationary or moving. The clutch
lever is located on the right-hand side to provide easy visibility
to implements during operation. |
|
|
3-POINT HITCH
The Category I & II, 3-point hitch has an adjustable top link,
crank-type lift rod and telescopic stabilizers to provide faster,
easier attachment of rear-mounted implements. |
|
 |
|
|
DECK
The deck was ergonomically designed to maximize operator
comfort. |
|
|
MAXIMUM COMFORT CAB
The M-Series cab is one of the most comfortable on the market today.
Thanks to a dual-level air conditioning system, it’s engineered
to provide plenty of legroom while reducing vibration and driver
fatigue. |
|
|
 |
| Back to top |
|
EXCELLENT VISIBILITY
Thanks to a large overall glass area and frameless doors,
we’re able to offer excellent visibility. The hatchback
type rear window can be opened. And the top hinged pantograph
front wiper helps further improve visibility. |
|
|
STANDARD EQUIPMENT FOR
CAB
The following equipment is available as standard.
• Front windshield wiper and washer
• Front and rear working lights
• Interior light
• Cigarette lighter
• External left mirror
• Sun visor
• Safety flashers (two)
• Tail lights (two)
• Cup holder |
|
|
|
OPTIONAL EQUIPMENT
FOR CAB
The following equipment is optional.
• Rear wiper and washer
• Radio-cassette player
• Right side mirror |
|
|
