 |
|
| Back to top |
|
E-TVCS ENGINE WITH DUAL ELEMENT
AIR CLEANER SYSTEM
The Kubota Emission Three Vortex Combustion System (E-TVCS)
is a sophisticated indirect injection, liquid-cooled diesel
that meets EPA regulations. The multi-valve system provides
efficient air intake that leads to greater power from faster
combustion, a higher torque rise and cleaner emissions.
A dual element air cleaner has a primary and a secondary
filter to ensure long engine life, and it also allows risk-free
primary filter replacement even in dusty conditions. |
|
|
BEVEL GEAR 4WD AND HYDROSTATIC POWER STEERING
Kubota’s renowned Bevel Gear 4WD system applies smooth consistent
power to the front wheels at all turning angles as well as a short
turning radius to enhance maneuverability. All gears are hermetically
sealed in oil for long life. The Hydrostatic Power Steering is smooth
and responsive, even under heavy loads. |
 |
 |
|
|
DIFFERENTIAL LOCKS
Front and rear differential locks eliminate wheel slippage
by simply depressing the pedals. The front lock can be operated
independently from the rear and provides unique control in
slippery conditions. |
|
|
CLUTCH
Kubota has upgraded the main clutch with a new, well-tested material
of superb abrasion resistance to extend clutch life. The reliability
of the clutch for heavy loader work has been further improved. The
clutch diameter is 11.8 inches (300mm). |
|
 |
|
| Back to top |
|
FULL-FLOATING ISO-MOUNTED SEMI-FLAT
DECK
The deck was ergonomically designed to maximize operator
comfort. The deck is spacious enough to allow comfort and
freedom of movement. ISO (Isolated)-mounting with rubber mat
also helps to decrease operator fatigue by reducing noise
and vibration, even after long hours on the job. |
|
|
ONE-PIECE FULL-OPEN HOOD
Maintenance is easily performed, thanks to the new high-access,
one-touch opening hood; servicing points such as the battery, air
cleaner, radiator screen, and fan belt are within easy reach. The
hood, fenders, and fuel tank are made of formed steel for longevity,
quick repair, and a sturdy, dignified look. |
 |
 |
|
|
HIGH-TORQUE RISE
The governor and fuel injection pumps are integrated into
a single, compact unit to produce an astounding 28% torque
rise. Response to sudden load fluctuations is quick, reducing
engine rpm drop. This means these tractors will perform smoothly
under virtually any load condition with less need for downshifting
and greater fuel efficiency. |
|
|
LIVE-INDEPENDENT HYDRAULIC PTO
The PTO lever is located for right-hand operation and is easily
engaged while watching your implement. The hydraulic PTO clutch
is self-modulating and can be engaged while the tractor is moving.
The hydraulic PTO clutch is cooled by oil for long life. The PTO
brake slows, stops, and retains the PTO when shut off. With the
engine off, the PTO can be turned 60 degrees for easy connection.
A dual speed 540/1000 PTO is optional. |
 |
 |
|
| Back to top |
|
AUXILIARY REMOTE HYDRAULIC VALVES
One, dual acting remote with self-canceling detent is standard,
two or three are optional. The optional flow feature controls
the amount of oil flow required. Float-type dent valves are
also available for single-acting cylinders. |
|
|
3-POINT HITCH
The Category II, 3-point hitch provides fast attachment of implements.
The lift rod and stabilizers allow easy implement hook-up. The telescopic
lower link ends further facilitate attachment. Lift capacity is
as much as 4630 lbs. (2100kg) at 24” behind the lift point. |
 |
 |
|
|
LARGE CAPACITY HYDRAULIC PUMPS
The M9000 pump system provides up to 17 gallons per minute
for maximum hydraulic performance at the remotes and 3-point
hitch to increase productivity. |
|
|
