Kubota Excavator Hydraulic Oils are uniquely formulated and designed to meet the stressful requirements of Kubota’s Excavators. They were developed & approved by Kubota Japan R & D. Its High viscosity provides consistent performance throughout the entire system where temperature may vary widely. Its superior corrosion resistance keeps machine parts clean and free of corrosion.  It has excellent anti-foaming properties that guard against cavitation of pumps and loss of hydraulic pressure. Its better oxidation resistance fights sludge and prolongs the fluid’s useful life. It is compatible with other hydraulic oils brands and there is no need to change the entire system to start using the Kubota’s Hydraulic Oil.

Kubota Heavy Duty Engine Oils are engineered to meet the most demanding lubrication requirements of today’s naturally aspirated, turbocharged, and supercharged diesel fueled engines, including engines with cooled exhaust gas recirculation (EGR). They are formulated with advanced additive technology (including foam control and soot dispersancy additives) and premium quality basestocks to protect engines against undesirable deposits, corrosion, oxidation, wear, and viscosity and thermal breakdown under severe service conditions. They meet the highest API (American Petroleum Institute) Service Categories for modern low emission diesel engines. These oils can also be used in transmission, hydraulic systems, and other industrial applications where the manufacturer recommends the use of an engine oil.

 

	Typical Properties
		15W40	10W-30	30
	Gravity, degree API	29.5	31.1	29.7
	Viscosity @ 40 C, cSt	117	80	86.89
	Viscosity @ 100 C, cSt	15.2	11.9	11.0
	Viscosity Index	135	143	113
	CCS Viscosity @ -25 C, cP	- - - -	6600	- - - -
	CCS Viscosity @ -20 C, cP	6600	- - - -	- - - -
	HTHS Viscosity, cP	4.2	3.5	3.7
	Borderline Pumping Viscosity	Pass	Pass	- - - -
	Pour Point, deg. C	-27	-33	-24
	Total Base Number (D-2896)	9	10	7
	Sulfated Ash, %	1	1	0.8
	Zinc, wt %	0.13	0.13	0.13

 

Kubota Gear Oils are superior sulfur-phosphorus, extreme pressure gear lubricants formulated with premium quality basestocks to meet the demands for excellent performance.  It is designed to provide excellent load carrying capacity, extreme pressure properties, anti-foam performance, demulsibility, corrosion protection, thermal stability protection, and service fill limited slip capability.  These products are recommended for conventional rear axles, limited slip rear axles, and transmissions requiring EP gear lubes under high speed, high load, high torque, and high horsepower conditions. Kubota Gear Oils meet or exceed:  Ford M2C108C;  Mack GO-H, GO-H, & GO-J;  Mil-L-2105E;  API Services GL-5, GL-4.

 

 

Performance     SAE 80W-90 SAE 85W-140     MIL-L-2105E X X     API GL-4 X X     API GL-5 X X

Product Codes and Container Sizer Available   SAE 80W-90     12/1 Quart 70000-10500     2/2.5 Gallon 70000-10502

 

 

Kubota Moly-Lithium Complex #2 Grease is a multi-purpose type grease developed to exceed the latest equipment requirements -- along with superior performance.

 

Kubota Moly-Lithium Complex #2 Grease contains molybdenum disulfide and graphite. This grease will not plate out forming an adhering film on metallic surfaces, reducing the coefficient of friction.

 

This product has excellent water resistance as well as outstanding temperature operating ranges. The molybdenum disulfide graphite will act as a dry lubricant when necessary.

 

Advantages Include:
• Excellent protection; High temperature +525 F Drop Point
• Good load carrying ability;
• Excellent retention under shock loading conditions; and
• Resistance to water

 

Applications - Automotive, industrial, fleet trucks and contractor service.
The characteristics (excellent in nature) are especially valuable in heavy-duty applications where sliding or oscillating motion is present as in bearings, steering linkage and fifth wheel assemblies.

 

Meets NLGI Service Classification LB-GC for chassis and wheel bearing greases as outlined in ASTM D 4950.

 

Typical Properties       PRODUCT CODE  910M     NLGI Grade  2     Viscosity @ 40C, cSt  145     Viscosity @ 100C, cSt  13     Viscosity @ 100F, SUS  800     Viscosity @ 100F, SUS  70     Penetration Worked  280     Dropping Point, F  550     Color Visual  Black      Texture  Smooth-Tacky      Timken OK, lbs  60     4-Ball EP Weld  400     Load Wear Index  65     Soap Type Lithium-Complex     Soap %  11-Jul     Wheel Bearing Leakage, ASTM D4290, g loss  2

Product Codes and Container Sizes Available       70000-10401 Moly-Lithium Grease / 14oz

 

 

For reliable, long lasting performance of your Kubota equipment, choose Kubota Genuine Products.